RidgeMaster Plus Ventilation System
- Designed for roof pitches from 14 to 45°
- Built-in end caps
- Keeps out debris
British Standards - The Eurocell Building Plastics products supplied by Eurocell Profiles Ltd are produced in accordance with a BS EN 1SO 9001:2000 accredited quality system.
Suitable for TapcoSlate Classic Ridge/Hip and DaVinci Select Shake Ridge/Hip, this accessory is a dry-fix ridge ventilation system that fits underneath the ridge.
Suitable for TapcoSlate Classic Ridge/Hip and DaVinci Select Shake Ridge/Hip, this accessory is a dry-fix ridge ventilation system that fits underneath the ridge of our aforementioned systems. A patented added-pitch design reduces the visibility of the vent opening, letting the roof profile take centre stage. The patented internal baffle keeps blowing snow and rain from entering, while an internal filter blocks out insects, leaves and other debris. Designed for roof pitches from 14 to 45°, the RidgeMaster Plus easily adapts to a peak vent or flash vent. Nailing supports and structural ribs make the RidgeMaster Plus crush-proof, to withstand falling tree branches and hammer blows, and it resists cracking. Self-aligning, interlocking ends make it easy to install correctly. Built-in end caps adjust to the roof pitch while the ship-lap design allows for expansion and contraction as temperatures change. Can be joined with HipMaster hip ventilation. 10,000mm²/m ventilation provision to comply with building regulations for both Warm and Cold roofs (above regulation minimum).