A dry-fix ridge 90° end cap to neatly weather seal and finish off the roof line at the end of the ridge.
Brick Red Tapco Slate Classic Ridge 90° End Cap 30-34° Pitch - 445mm x 275mm
Product Code
RIDGEENDBR30-34DEG
A dry-fix ridge 90° end cap to neatly weather seal and finish off the roof line at the end of the ridge.
- Lightweight – as low as 12kg per square metre
- Easy to install with pre-marked nailing guides and spacers
- Easily cut with a fine-toothed saw or sharp utility blade
£31.10
£25.92
| Width | 275mm |
|---|---|
| Length | 445mm |
| Colour | Brick Red |
£31.10
£25.92
A dry-fix ridge 90° end cap to neatly weather seal and finish off the roof line at the end of the ridge.
Suitable for TapcoSlate Classic and TapcoSlate Classic Ridge & Hip Caps, this accessory is a dry-fix ridge 90° end cap to neatly weather seal and finish off the roof line at the end of the ridge. 30 to 34° pitch to match the slope of your roof. This ridge accessory is manufactured in the same material as our TapcoSlate Classic product to beautifully match your roof slate. TapcoSlate Classic ridge 90° end caps have a degree of flexibility when fixing and have the same properties as our roofing slate. Overall Length 445mm, Overall Width 275mm, Overall Height 80mm, Side Pitch 30°, End Pitch 90°. To Fit 30° to 34° roof pitches.
| Material | Polypropylene |
|---|---|
| Pack Quantity | Each |
| Width | 275mm |
| Length | 445mm |
| Colour | Brick Red |
| Brand | Tapco |
| EAN Number | 5059688281855 |
- Fully tested to BBA, UKTA and ETA standards, and has UKCA and CE marking, including fire rating, wind, driven snow & rain, and water absorption
Customer Questions
